Hot-Air Brushes
Compare UK BaByliss models 2136U and 2764U by attachments, brush format, controls and care before choosing a hot-air styling routine.
This compares those two exact UK models. Their names do not establish an equivalent US, Canadian or Australian appliance, plug or warranty. The comparison is based on published construction and instructions, not measured results.
Table: swipe sideways on a small screen, or focus and use arrow keys.
A missing field stays unknown. Do not infer it from another colour, bundle, market or product generation.
| Decision | Air Style 1000, 2136U | Flawless Volume, 2764U | Practical consequence |
|---|---|---|---|
| Format | Interchangeable styling attachments. | One brush head; no attachment swapping described. | Switch heads for distinct tasks, or keep one brush-shaped process. |
| Brush | 50 mm volumising brush; a separate paddle brush is included. | 38 mm brush head. | The smaller named barrel may be easier to position on a shorter section, but no styling result is guaranteed. |
| Other parts | Drying nozzle, conical curling attachment and heat glove are documented in the manual. | No interchangeable attachment process is described in the 2764U manual. | The 2136U asks you to store and select more parts. |
| Controls | Low and high heat plus cool; attachments click onto the handle. | Low and high heat plus cool; the manual describes turning the whole styler by hand. | Read the exact instructions before changing heads or turning the brush. |
| Published power | 1,000 W on the UK product listing. | 500 W on the UK product listing. | Wattage alone cannot establish airflow or drying time. |
| UK guarantee | Three years for UK consumer use in the 2136U manual. | Three years for UK consumer use in the 2764U manual. | Neither statement establishes coverage outside the UK. |
The 2136U manual describes a drying nozzle to remove excess moisture before styling, then different attachments for lift, smoothing or a curl. This suits someone willing to change the head to change the job. The conical attachment requires the supplied heat glove as instructed; it is a different handling step from brushing through a section. Confirm the full current box contents on the seller listing, because bundles can change.
The 2764U manual describes placing its brush under a section, lifting near the roots, moving along the section and turning the styler slightly at the ends. That format keeps the operation centered on one brush. The manual does not describe a powered rotation control, so do not choose it on that assumption.
This is a schematic workflow, not a scale drawing or performance test.
Both manuals tell the user to remove excess moisture and section the hair before styling. The 2136U instructions specify starting at about 80% dry and describe the attachment release buttons. The 2764U instructions also describe rough drying longer or thicker hair before brush styling. These are model instructions, not a universal starting-moisture rule for all hot-air brushes.
For either model, switch off, unplug and let the appliance cool before cleaning. The 2136U manual describes clearing debris from the rear filter with a soft brush. The 2764U manual describes twisting off its rear filter before brushing debris away and replacing it until it clicks. Do not transfer one filter procedure to the other model. Neither UK listing alone proves the exact rated voltage or suitability for another country's mains supply; check the appliance rating plate and manual before travel.
Before you replace a working tool
Tick each statement only when the article or exact product source supports it.
Your answers stay in this page session and are not used to build a personal profile.
Start with the task your current tool cannot perform. If there is no missing task, keep the tool you have.
This checklist organises your decision. It does not test products or predict results.
If you already have a dryer and round brush that give you the control you want, neither appliance is a necessary upgrade. For other brush formats, compare the options in the hot-air brush selection guide. If the question is barrel handling, use the barrel-size guide. The dryer-and-round-brush comparison covers the separate-tool alternative.
The 2764U instructions describe turning the whole styler slightly while styling; they do not establish powered head rotation.